60 Technik
Filtern
Erscheinungsjahr
Dokumenttyp
Volltext vorhanden
- ja (33)
Gehört zur Bibliographie
- nein (33)
Schlagworte
- Elektromobilität (3)
- Rapid Prototyping <Fertigung> (3)
- additive manufacturing (3)
- 3D-Druck (2)
- Biokatalyse (2)
- Biotechnik (2)
- CO2 (2)
- Dach (2)
- Elektrode (2)
- Elektrofahrzeug (2)
Understanding and modulating CNS function in physiological as well as pathophysiological contexts remains a significant ambition in research and clinical applications. The investigation of the multifaceted CNS cell types including their interactions and contributions to neural function requires a combination of the state-of-the-art in vivo electrophysiology and imaging techniques. We developed a novel type of liquid crystal polymer (LCP) surface micro-electrode manufactured in three customized designs with up to 16 channels for recording and stimulation of brain activity. All designs include spare central spaces for simultaneous 2P-imaging. Nanoporous platinum-plated contact sites ensure a low impedance and high current transfer. The epidural implantation of the LCP micro-electrodes could be combined with standard cranial window surgery. The epidurally positioned electrodes did not only display long-term biocompatibility, but we also observed an additional stabilization of the underlying CNS tissue. We demonstrate the electrode’s versatility in combination with in vivo 2P-imaging by monitoring anesthesia-awake cycles of transgenic mice with GCaMP3 expression in neurons or astrocytes. Cortical stimulation and simultaneous 2P Ca2+ imaging in neurons or astrocytes highlighted the astrocytes’ integrative character in neuronal activity processing. Furthermore, we confirmed that spontaneous astroglial Ca2+ signals are dampened under anesthesia, while evoked signals in neurons and astrocytes showed stronger dependency on stimulation intensity rather than on various levels of anesthesia. Finally, we show that the electrodes provide recordings of the electrocorticogram (ECoG) with a high signal-to noise ratio and spatial signal differences which help to decipher brain activity states during experimental procedures. Summarizing, the novel LCP surface micro-electrode is a versatile, convenient, and reliable tool to investigate brain function in vivo.
As productive biofilms are increasingly gaining interest in research, the quantitative monitoring of biofilm formation on- or offline for the process remains a challenge. Optical coherence tomography (OCT) is a fast and often used method for scanning biofilms, but it has difficulty scanning through more dense optical materials. X-ray microtomography (μCT) can measure biofilms in most geometries but is very time-consuming. By combining both methods for the first time, the weaknesses of both methods could be compensated. The phototrophic cyanobacterium Tolypothrix distorta was cultured in a moving bed photobioreactor inside a biocarrier with a semi-enclosed geometry. An automated workflow was developed to process µCT scans of the biocarriers. This allowed quantification of biomass volume and biofilm-coverage on the biocarrier, both globally and spatially resolved. At the beginning of the cultivation, a growth limitation was detected in the outer region of the carrier, presumably due to shear stress. In the later phase, light limitations could be found inside the biocarrier. µCT data and biofilm thicknesses measured by OCT displayed good correlation. The latter could therefore be used to rapidly measure the biofilm formation in a process. The methods presented here can help gain a deeper understanding of biofilms inside a process and detect any limitations.
Since operational managers often monitor large numbers of wind turbines (WTs), they depend on a toolset to provide them with highly condensed information to identify and prioritize low performing WTs or schedule preventive maintenance measures. Power curves are a frequently used tool to assess the performance of WTs. The power curve health value (HV) used in this work is supposed to detect power curve anomalies since small deviations in the power curve are not easy to identify. It evaluates deviations in the linear region of power curves by performing a principal component analysis. To calculate the HV, the standard deviation in direction of the second principal component of a reference data set is compared to the standard deviation of a combined data set consisting of the reference data and data of the evaluated period. This article examines the applicability of this HV for different purposes as well as its sensitivities and provides a modified HV approach to make it more robust and suitable for heterogeneous data sets. The modified HV was tested based on ENGIE's open data wind farm and data of on- and offshore WTs from the WInD-Pool. It proved to detect anomalies in the linear region of the power curve in a reliable and sensitive manner and was also eligible to detect long term power curve degradation. Also, about 7 % of all corrective maintenance measures were preceded by high HVs with a median alarm horizon of three days. Overall, the HV proved to be a promising tool for various applications.
Artificial light at night (ALAN) is a widespread alteration of the natural environment that can affect the functioning of ecosystems. ALAN can change the movement patterns of freshwater animals that move into the adjacent riparian and terrestrial ecosystems, but the implications for local riparian consumers that rely on these subsidies are still unexplored. We conducted a 2-year field experiment to quantify changes of freshwater-terrestrial linkages by installing streetlights in a previously light-naïve riparian area adjacent to an agricultural drainage ditch. We compared the abundance and community composition of emerging aquatic insects, flying insects, and ground-dwelling arthropods with an unlit control site. Comparisons were made within and between years using two-way generalized least squares (GLS) model and a BACI design (Before-After Control-Impact). Aquatic insect emergence, the proportion of flying insects that were aquatic in origin, and the total abundance of flying insects all increased in the ALAN-illuminated area. The abundance of several night-active ground-dwelling predators (Pachygnatha clercki, Trochosa sp., Opiliones) increased under ALAN and their activity was extended into the day. Conversely, the abundance of nocturnal ground beetles (Carabidae) decreased under ALAN. The changes in composition of riparian predator and scavenger communities suggest that the increase in aquatic-to-terrestrial subsidy flux may cascade through the riparian food web. The work is among the first studies to experimentally manipulate ALAN using a large-scale field experiment, and provides evidence that ALAN can affect processes that link adjacent ecosystems. Given the large number of streetlights that are installed along shorelines of freshwater bodies throughout the globe, the effects could be widespread and represent an underestimated source of impairment for both aquatic and riparian systems.
In this paper, the radio frequency (RF) behavior of mechanically stressed coaxial and for the first time also twisted-pair transmission lines is investigated over their service life. The main goal is to enable predictive maintenance for cables in moving applications and avoid preventive replacement. This also reduces the use of high-cost resources. For this purpose, stranded and solid-core variants of coaxial and twisted-pair type cables are mechanically loaded on the two-pulley apparatus according to EN 50396. Their RF transmission (S21) behavior is measured using a vector network analyzer and presented over bending cycles. For the first time, the phase response of mechanically loaded transmission lines is evaluated with respect to their service life. Two significant causes for the increasing attenuation and altered phase response are identified: breakage in foil screen and increasing surface roughness on the copper conductors. The identified causes are supported with literature evidence. Through measurements and theoretical calculations, it is proven that the phase is much more suitable for an assessment of the remaining service life than the amplitude. The findings can be used to implement a cable monitoring system in industrial environments which monitors the lines in-situ and reminds the user to replace them, whenever a certain wear-level is reached.
Gait analysis is a systematic study of human movement. Combining wearable foot pressure sensors and machine learning (ML) solutions for a high-fidelity body pose tracking from RGB video frames could reveal more insights into gait abnormalities. However, accurate detection of heel strike (HS) and toe-off (TO) events is crucial to compute interpretable gait parameters. In this work, we present an experimental platform to study the timing of gait events using a new wearable foot pressure sensor (ActiSense System, IEE S.A., Luxembourg), and Google’s open-source ML solution MediaPipe Pose. For this purpose, two StereoPi systems were built to capture stereoscopic videos and images in real time. MediaPipe Pose was applied to the synchronized StereoPi cameras, and two algorithms (ALs) were developed to detect HS and TO events for gait and analysis. Preliminary results from a healthy subject walking on a treadmill show a mean relative deviation across all time spans of less than 4% for the ActiSense device and less than 16% for AL2 (33% for AL1) employing MediaPipe Pose on StereoPi videos. Finally, this work offers a platform for the development of sensor- and video-based ALs to automatically identify the timing of gait events in healthy individuals and those with gait disorders.
For the assessment of human reaction time, a test environment was developed. This system consists of an embedded device with organic light-emitting diode (OLED) displays with push buttons for the combined presentation of visual stimulation and registration of the haptic human reaction. The test leader can define the test sequence with the aid of a graphical user interface (GUI) on a personal computer (PC). The validation of the system was proved by measuring the latency times of the whole system, which are conditioned by the specific hard- and software constellation. Through the investigation of the display’s light radiation by a photodiode and the recorded current consumption, latency times and their variance were specified. In the fastest mode the system can reach an error limit of 60 μs.
The number of additive manufacturing methods and materials is growing rapidly, leaving gaps in the knowledge of specific material properties. A relatively recent addition is the metal-filled filament to be printed similarly to the fused filament fabrication (FFF) technology used for plastic materials, but with additional debinding and sintering steps. While tensile, bending, and shear properties of metals manufactured this way have been studied thoroughly, their fatigue properties remain unexplored. Thus, the paper aims to determine the tensile, fatigue, and impact strengths of Markforged 17-4 PH and BASF Ultrafuse 316L stainless steel to answer whether the metal FFF can be used for structural parts safely with the current state of technology. They are compared to two 316L variants manufactured via selective laser melting (SLM) and literature results. For extrusion-based additive manufacturing methods, a significant decrease in tensile and fatigue strength is observed compared to specimens manufactured via SLM. Defects created during the extrusion and by the pathing scheme, causing a rough surface and internal voids to act as local stress risers, handle the strength decrease. The findings cast doubt on whether the metal FFF technique can be safely used for structural components; therefore, further developments are needed to reduce internal material defects.
Railroads, roads, rivers, and airways are the most common modes of transportation for people and commodities. The cost of different ways of transportation varies according to distance, luxury, size, fragility, and other factors. When the following factors are accounted for, the vehicle might become prohibitively expensive for many individuals. A new means of conveyance has been developed. Elon Musk initially proposed it as the fifth mode of transportation in 2012. For commuters and goods, Hyperloop offers a quick and cost-effective way of transportation. The Hyperloop is essentially a vacuum tube train that transports people or products at incredible speeds while efficiently. Compared to traditional forms of transportation, the Hyperloop is ideal since it is highly energy-efficient, quiet, and self-contained. Increased cargo delivery speeds will be the most evident benefit of this idea to the industry. Hyperloop also has the potential to make a significant contribution to green supply chains. It is a carbon-free form of transportation that has changed inland freight transportation and maritime and air freight transit. It can move freight below, above ground, and under-water. The aim of this paper is to explain this new innovative technology as a development for logistic concepts.
This study will describe how the robotics industry evolved increasingly and a new phase of advanced robotics has emerged, and the relation between humans and robots in the same workplace. Problems of designing safer robots in human-machine interaction systems are urgent research topics in the field of industrial robotics. Many of the problems in industrial robotics are related not just to technological issues, but also to human-robot collaboration also will be discussed as an effective method to tackle this issue is the invention of Collaborative robots.