60 Technik
Filtern
Dokumenttyp
Sprache
- Englisch (14) (entfernen)
Volltext vorhanden
- ja (14)
Gehört zur Bibliographie
- nein (14)
Schlagworte
- CO2-Bilanz (3)
- Elektrofahrzeug (3)
- Rapid Prototyping <Fertigung> (3)
- CO2 (2)
- Elektromobilität (2)
- Energiemodell (2)
- Personenkraftwagen (2)
- Selektives Laserschmelzen (2)
- Umweltbilanz (2)
- additive manufacturing (2)
- climate policy (2)
- efficiency trade-offs (2)
- greenhouse gas emissions (2)
- 3D printing (1)
- 3D-Druck (1)
- ALAN (1)
- Additive manufacturing (1)
- BASF Ultrafuse (1)
- BEV (1)
- Batteriefahrzeug (1)
- Brennstoffzellenfahrzeug (1)
- CO2 emissions (1)
- Carbon footprint (1)
- Charpy impact energy (1)
- Dieselkraftstoff (1)
- E-Scooter (1)
- Electric kick scooter (1)
- Energie (1)
- Energy model (1)
- Environmental impact (1)
- Erwärmung <Meteorologie> (1)
- European diesel car boom (1)
- FCEV (1)
- Festigkeit (1)
- Frequenzumsetzung (1)
- Frequenzverdopplung (1)
- Fused Deposition Modeling (1)
- GHG (1)
- GHG accounting and reporting (1)
- Global warming potential (GWP) (1)
- Güterverkehr (1)
- HDV (1)
- ICEV (1)
- Insekten (1)
- K2Al2B2O7 (1)
- KABO (1)
- Klimaschutz (1)
- Klimaänderung (1)
- Kohlendioxidemission (1)
- Kristall (1)
- Kunststoff (1)
- LCA (1)
- Lasertechnologie (1)
- Lastkraftwagen (1)
- Lebensdauer (1)
- Leistung (1)
- Lichtverschmutzung (1)
- Life cycle assessment (1)
- Markforged (1)
- Materialermüdung (1)
- Micro-mobility (1)
- Mobility mode (1)
- NLO crystals (1)
- NLO-Kristall (1)
- Nachhaltigkeit (1)
- Nichtlineare Optik (1)
- Nullemission (1)
- PBF-LB/M (1)
- PETG (1)
- Recycling (1)
- Resource efficiency (1)
- Ressourceneffizienz (1)
- Rotationsdispersion (1)
- Ruß (1)
- SLM (1)
- Shared feet application greenhouse gases (1)
- Treibhausgas (1)
- Universität (1)
- Verkehrswende (1)
- Wasserstoffmotor (1)
- Wassertiere (1)
- Wellenlänge (1)
- Windturbine (1)
- YAB (1)
- YAl3(BO3)4 (1)
- aquatic subsidies (1)
- battery electric (1)
- battery electric vehicles (1)
- black carbon (1)
- carbon footprint (1)
- carbon footprinting (1)
- carbon offsetting (1)
- climate change mitigation (1)
- cross-ecosystem (1)
- diesel emissions (1)
- e-bikes (1)
- e-boards (1)
- electric cars (1)
- electric conversion (1)
- electric kick scooters (1)
- electric light commercial vehicles (1)
- electric motorcycles (1)
- electric three- and four-wheelers (1)
- electric trucks (1)
- electric vehicles (1)
- electricity (1)
- energy (1)
- energy impacts (1)
- energy modeling (1)
- energy system (1)
- energy system modeling (1)
- environmental effect (1)
- fatigue properties (1)
- freight (1)
- frequency conversion (1)
- fuel cell (1)
- fuel cell vehicles (1)
- global warming potential (1)
- heat (1)
- higher education institutions (1)
- hydrogen (1)
- insects (1)
- internal combustion engine vehicle (1)
- inversion twin (1)
- life cycle (1)
- life cycle assessment (1)
- light pollution (1)
- mechanical testing (1)
- mobility impacts (1)
- modeling (1)
- optical activity (1)
- optical rotatory dispersion (1)
- optimization (1)
- passenger cars (1)
- per capita carbon footprint (1)
- plastics recycling (1)
- plug-in hybrid electric vehicle (1)
- power curve anomalies (1)
- power curve health value (1)
- predator-prey (1)
- probabilistic (1)
- radiative forcing (1)
- real-world emissions (1)
- renewable energy (1)
- second harmonic generation (1)
- strategy (1)
- sustainable mobility (1)
- sustainable road transport (1)
- tensile strength (1)
- traffic emissions (1)
- transport (1)
- truck (1)
- university carbon footprint (1)
- university sustainability (1)
- urban mobility (1)
- vehicle mass (1)
- vehicle power (1)
- wind turbine (1)
- zero emission university (1)
Institut
- FB Umweltplanung/-technik (UCB) (14) (entfernen)
Artificial light at night (ALAN) is a widespread alteration of the natural environment that can affect the functioning of ecosystems. ALAN can change the movement patterns of freshwater animals that move into the adjacent riparian and terrestrial ecosystems, but the implications for local riparian consumers that rely on these subsidies are still unexplored. We conducted a 2-year field experiment to quantify changes of freshwater-terrestrial linkages by installing streetlights in a previously light-naïve riparian area adjacent to an agricultural drainage ditch. We compared the abundance and community composition of emerging aquatic insects, flying insects, and ground-dwelling arthropods with an unlit control site. Comparisons were made within and between years using two-way generalized least squares (GLS) model and a BACI design (Before-After Control-Impact). Aquatic insect emergence, the proportion of flying insects that were aquatic in origin, and the total abundance of flying insects all increased in the ALAN-illuminated area. The abundance of several night-active ground-dwelling predators (Pachygnatha clercki, Trochosa sp., Opiliones) increased under ALAN and their activity was extended into the day. Conversely, the abundance of nocturnal ground beetles (Carabidae) decreased under ALAN. The changes in composition of riparian predator and scavenger communities suggest that the increase in aquatic-to-terrestrial subsidy flux may cascade through the riparian food web. The work is among the first studies to experimentally manipulate ALAN using a large-scale field experiment, and provides evidence that ALAN can affect processes that link adjacent ecosystems. Given the large number of streetlights that are installed along shorelines of freshwater bodies throughout the globe, the effects could be widespread and represent an underestimated source of impairment for both aquatic and riparian systems.
Carbon footprinting of universities worldwide: Part I — objective comparison by standardized metrics
(2021)
Background: Universities, as innovation drivers in science and technology worldwide, should be leading the Great Transformation towards a carbon–neutral society and many have indeed picked up the challenge. However, only a small number of universities worldwide are collecting and publishing their carbon footprints, and some of them have defined zero emission targets. Unfortunately, there is limited consistency between the reported carbon footprints (CFs) because of different analysis methods, different impact measures, and different target definitions by the respective universities.
Results: Comprehensive CF data of 20 universities from around the globe were collected and analysed. Essential factors contributing to the university CF were identified. For the first time, CF data from universities were not only compared. The CF data were also evaluated, partly corrected, and augmented by missing contributions, to improve the consistency and comparability. The CF performance of each university in the respective year is thus homogenized, and measured by means of two metrics: CO2e emissions per capita and per m2 of constructed area. Both metrics vary by one order of magnitude across the different universities in this study. However, we identified ten universities reaching a per capita carbon footprint of lower than or close to 1.0 Mt (metric tons) CO2e/person and year (normalized by the number of people associated with the university), independent from the university’s size. In addition to the aforementioned two metrics, we suggested a new metric expressing the economic efficiency in terms of the CF per $ expenditures and year. We next aggregated the results for all three impact measures, arriving at an overall carbon performance for the respective universities, which we found to be independent of geographical latitude. Instead the per capita measure correlates with the national per capita CFs, and it reaches on average 23% of the national impacts per capita. The three top performing universities are located in Switzerland, Chile, and Germany.
Conclusion: The usual reporting of CO2 emissions is categorized into Scopes 1–3 following the GHG Protocol Corporate Accounting Standard which makes comparison across universities challenging. In this study, we attempted to standardize the CF metrics, allowing us to objectively compare the CF at several universities. From this study, we observed that, almost 30 years after the Earth Summit in Rio de Janeiro (1992), the results are still limited. Only one zero emission university was identified, and hence, the transformation should speed up globally.
A comprehensive overview is provided evaluating direct real-world CO2 emissions of both diesel and petrol cars newly registered in Europe between 1995 and 2015. Before 2011, European diesel cars emitted less CO2 per kilometre than petrol cars, but since then there is no appreciable difference in per-km CO2 emissions between diesel and petrol cars. Real-world CO2 emissions of diesel cars have not declined appreciably since 2001, while the CO2 emissions of petrol cars have been stagnant since 2012. When adding black carbon related CO2-equivalents, such as from diesel cars without particulate filters, diesel cars were discovered to have had much higher climate relevant emissions until the year 2001 when compared to petrol cars. From 2001 to 2015 CO2-equivalent emissions from new diesel cars and petrol cars were hardly distinguishable. Lifetime use phase CO2-equivalent emissions of all European passenger vehicles were modelled for 1995–2015 based on three scenarios: the historic case, another scenario freezing percentages of diesel cars at the low levels from the early 1990s (thus avoiding the observed “boom” in new diesel registrations), and an advanced mitigation scenario based on high proportions of petrol hybrid cars and cars burning gaseous fuels. The difference in CO2-equivalent emissions between the historical case and the scenario avoiding the diesel car boom is only 0.4%. The advanced mitigation scenario would have been able to achieve a 3.4% reduction in total CO2-equivalent emissions over the same time frame. The European diesel car boom appears to have been ineffective at reducing climate-warming emissions from the European transport sector.
Background: Electric vehicles have been identified as being a key technology in reducing future emissions and energy consumption in the mobility sector. The focus of this article is to review and assess the energy efficiency and the environmental impact of battery electric cars (BEV), which is the only technical alternative on the market available today to vehicles with internal combustion engine (ICEV). Electricity onboard a car can be provided either by a battery or a fuel cell (FCV). The technical structure of BEV is described, clarifying that it is relatively simple compared to ICEV. Following that, ICEV can be ‘e-converted’ by experienced personnel. Such an e-conversion project generated reality-close data reported here.
Results: Practicability of today's BEV is discussed, revealing that particularly small-size BEVs are useful. This article reports on an e-conversion of a used Smart. Measurements on this car, prior and after conversion, confirmed a fourfold energy efficiency advantage of BEV over ICEV, as supposed in literature. Preliminary energy efficiency data of FCV are reviewed being only slightly lower compared to BEV. However, well-to-wheel efficiency suffers from 47% to 63% energy loss during hydrogen production. With respect to energy efficiency, BEVs are found to represent the only alternative to ICEV. This, however, is only true if the electricity is provided by very efficient power plants or better by renewable energy production. Literature data on energy consumption and greenhouse gas (GHG) emission by ICEV compared to BEV suffer from a 25% underestimation of ICEV-standardized driving cycle numbers in relation to street conditions so far. Literature data available for BEV, on the other hand, were mostly modeled and based on relatively heavy BEV as well as driving conditions, which do not represent the most useful field of BEV operation. Literature data have been compared with measurements based on the converted Smart, revealing a distinct GHG emissions advantage due to the German electricity net conditions, which can be considerably extended by charging electricity from renewable sources. Life cycle carbon footprint of BEV is reviewed based on literature data with emphasis on lithium-ion batteries. Battery life cycle assessment (LCA) data available in literature, so far, vary significantly by a factor of up to 5.6 depending on LCA methodology approach, but also with respect to the battery chemistry. Carbon footprint over 100,000 km calculated for the converted 10-year-old Smart exhibits a possible reduction of over 80% in comparison to the Smart with internal combustion engine.
Conclusion: Findings of the article confirm that the electric car can serve as a suitable instrument towards a much more sustainable future in mobility. This is particularly true for small-size BEV, which is underrepresented in LCA literature data so far. While CO2-LCA of BEV seems to be relatively well known apart from the battery, life cycle impact of BEV in categories other than the global warming potential reveals a complex and still incomplete picture. Since technology of the electric car is of limited complexity with the exception of the battery, used cars can also be converted from combustion to electric. This way, it seems possible to reduce CO2-equivalent emissions by 80% (factor 5 efficiency improvement).
Background: As electric kick scooters, three-wheelers, and passenger cars enter the streets, efficiency trade-offs across vehicle types gain practical relevance for consumers and policy makers. Here, we compile a comprehensive dataset of 428 electric vehicles, including seven vehicle types and information on certified and real-world energy consumption. Regression analysis is applied to quantify trade-offs between energy consumption and other vehicle attributes.
Results: Certified and real-world energy consumption of electric vehicles increase by 60% and 40%, respectively, with each doubling of vehicle mass, but only by 5% with each doubling of rated motor power. These findings hold roughly also for passenger cars whose energy consumption tends to increase 0.6 ± 0.1 kWh/100 km with each 100 kg of vehicle mass. Battery capacity and vehicle mass are closely related. A 10 kWh increase in battery capacity increases the mass of electric cars by 15 kg, their drive range by 40–50 km, and their energy consumption by 0.7–1.0 kWh/100 km. Mass-produced state-of-the-art electric passenger cars are 2.1 ± 0.8 kWh/100 km more efficient than first-generation vehicles, produced at small scale.
Conclusion: Efficiency trade-offs in electric vehicles differ from those in conventional cars—the latter showing a strong dependency of fuel consumption on rated engine power. Mass-related efficiency trade-offs in electric vehicles are large and could be tapped by stimulating mode shift from passenger cars to light electric road vehicles. Electric passenger cars still offer potentials for further efficiency improvements. These could be exploited through a dedicated energy label with battery capacity as utility parameter.
This research conducted a probabilistic life-cycle assessment (pLCA) into the greenhouse gas (GHG) emissions performance of nine combinations of truck size and powertrain technology for a recent past and a future (largely decarbonised) situation in Australia. This study finds that the relative and absolute life-cycle GHG emissions performance strongly depends on the vehicle class, powertrain and year of assessment. Life-cycle emission factor distributions vary substantially in their magnitude, range and shape. Diesel trucks had lower life-cycle GHG emissions in 2019 than electric trucks (battery, hydrogen fuel cell), mainly due to the high carbon-emission intensity of the Australian electricity grid (mainly coal) and hydrogen production (mainly through steam–methane reforming). The picture is, however, very different for a more decarbonised situation, where battery electric trucks, in particular, provide deep reductions (about 75–85%) in life-cycle GHG emissions. Fuel-cell electric (hydrogen) trucks also provide substantial reductions (about 50–70%), but not as deep as those for battery electric trucks. Moreover, hydrogen trucks exhibit the largest uncertainty in emissions performance, which reflects the uncertainty and general lack of information for this technology. They therefore carry an elevated risk of not achieving the expected emission reductions. Battery electric trucks show the smallest (absolute) uncertainty, which suggests that these trucks are expected to deliver the deepest and most robust emission reductions. Operational emissions (on-road driving and vehicle maintenance combined) dominate life-cycle emissions for all vehicle classes. Vehicle manufacturing and upstream emissions make a relatively small contribution to life-cycle emissions from diesel trucks (<5% each), but these are important aspects for electric trucks (5% to 30%).
Since operational managers often monitor large numbers of wind turbines (WTs), they depend on a toolset to provide them with highly condensed information to identify and prioritize low performing WTs or schedule preventive maintenance measures. Power curves are a frequently used tool to assess the performance of WTs. The power curve health value (HV) used in this work is supposed to detect power curve anomalies since small deviations in the power curve are not easy to identify. It evaluates deviations in the linear region of power curves by performing a principal component analysis. To calculate the HV, the standard deviation in direction of the second principal component of a reference data set is compared to the standard deviation of a combined data set consisting of the reference data and data of the evaluated period. This article examines the applicability of this HV for different purposes as well as its sensitivities and provides a modified HV approach to make it more robust and suitable for heterogeneous data sets. The modified HV was tested based on ENGIE's open data wind farm and data of on- and offshore WTs from the WInD-Pool. It proved to detect anomalies in the linear region of the power curve in a reliable and sensitive manner and was also eligible to detect long term power curve degradation. Also, about 7 % of all corrective maintenance measures were preceded by high HVs with a median alarm horizon of three days. Overall, the HV proved to be a promising tool for various applications.
This paper presents a feasibility study for the production of recycled glycol modified polyethylene terephthalate (PETG) material for additive manufacturing. Past studies showed a variety of results for the recycling of 3D-printing material, therefore the precise effect on the material properties is not completely clear. For this work, PETG waste of the same grade was recycled once and further processed into 3D printing filament. The study compares three blend ratios between purchased plastic pellets and recycled pellets to determine the degradation effect of one recycling cycle and possible blend ratios to counter these effects. Furthermore, the results include a commercially available filament. The comparison uses the filament diameter, the dimensional accuracy of the printed test specimen and mechanical properties as quality criteria. The study shows that the recycled material has a minor decrease concerning the tensile strength and Young’s modulus.
Background: The environmental impact of electric scooters has been the subject of critical debate in the scientific community for the past 5 years. The data published so far are very inhomogeneous and partly methodologically incomplete. Most of the data available in the literature suffer from an average bias of 34%, because end-of-life (EOL) impacts have not been modelled, reported or specified. In addition, the average lifetime mileage of shared fleets of e-scooters, as they are operated in cities around the world, has recently turned out to be much lower than expected. This casts the scooters in an unfavourable light for the necessary mobility transition. Data on impact categories other than the global warming potential (GWP) are scarce. This paper aims to quantify the strengths and weaknesses of e-scooters in terms of their contribution to sustainable transport by more specifically defining and extending the life cycle assessment (LCA) modelling conditions: the modelling is based on two genuine material inventories obtained by dismantling two different e-scooters, one based on a traditional aluminium frame and another, for the first time, based on plastic material.
Results: This study provides complete inventory data to facilitate further LCA modelling of electric kick scooters. The plastic scooter had a 26% lower lifetime GWP than the aluminium vehicle. A favourable choice of electric motor promises a further reduction in GWP. In addition to GWP, the scooter's life cycles were assessed across seven other impact categories and showed no critical environmental or health impacts compared to a passenger car. On the other hand, only the resource extraction impact revealed clear advantages for electric scooters compared to passenger cars.
Conclusions: Under certain conditions, scooters can still be an important element of the desired mobility transition. To assure a lifetime long enough is the crucial factor to make the electric scooter a favourable or even competitive vehicle in a future sustainable mobility system. A scooter mileage of more than 5400 km is required to achieve lower CO2eq/pkm emissions compared to passenger cars, which seems unlikely in today's standard use case of shared scooter fleets. In contrast, a widespread use of e-scooters as a commuting tool is modelled to be able to save 4% of greenhouse gas (GHG) emissions across the German mobility sector.
Passenger cars in Europe have become both heavier and more powerful over the past decades. This trend has increased vehicle utility but it might have also offset technical improvements in powertrain efficiency. Here, we analyze efficiency trade-offs and CO2 emissions for three popular compact cars in Germany. We find that mass, power, and front area of model variants has increased by 66%, 147%, and 22%, respectively between 1980 and 2018. In the same period, fuel consumption decreased 14% for gasoline models but it increased 9% for diesel models. However, if vehicle mass, power, and front area had remained at 1980 levels, technical efficiency improvements would have decreased the fuel consumption of gasoline and diesel models by 23% and 24%, respectively. The related efficiency trade-offs amount to 24 g CO2/km or 13% of the current fuel consumption for gasoline models and 40 g CO2/km or 25% of the current fuel consumption for diesel models. These findings suggest that about half of the technical efficiency improvements in gasoline models and all of the technical efficiency improvements in diesel models are offset through other vehicle attributes. By accounting for the observed efficiency trade-offs, climate policy could become more effective.