60 Technik
Filtern
Erscheinungsjahr
Dokumenttyp
Volltext vorhanden
- ja (33)
Gehört zur Bibliographie
- nein (33)
Schlagworte
- Elektromobilität (3)
- Rapid Prototyping <Fertigung> (3)
- additive manufacturing (3)
- 3D-Druck (2)
- Biokatalyse (2)
- Biotechnik (2)
- CO2 (2)
- Dach (2)
- Elektrode (2)
- Elektrofahrzeug (2)
In this paper, the radio frequency (RF) behavior of mechanically stressed coaxial and for the first time also twisted-pair transmission lines is investigated over their service life. The main goal is to enable predictive maintenance for cables in moving applications and avoid preventive replacement. This also reduces the use of high-cost resources. For this purpose, stranded and solid-core variants of coaxial and twisted-pair type cables are mechanically loaded on the two-pulley apparatus according to EN 50396. Their RF transmission (S21) behavior is measured using a vector network analyzer and presented over bending cycles. For the first time, the phase response of mechanically loaded transmission lines is evaluated with respect to their service life. Two significant causes for the increasing attenuation and altered phase response are identified: breakage in foil screen and increasing surface roughness on the copper conductors. The identified causes are supported with literature evidence. Through measurements and theoretical calculations, it is proven that the phase is much more suitable for an assessment of the remaining service life than the amplitude. The findings can be used to implement a cable monitoring system in industrial environments which monitors the lines in-situ and reminds the user to replace them, whenever a certain wear-level is reached.
Understanding and modulating CNS function in physiological as well as pathophysiological contexts remains a significant ambition in research and clinical applications. The investigation of the multifaceted CNS cell types including their interactions and contributions to neural function requires a combination of the state-of-the-art in vivo electrophysiology and imaging techniques. We developed a novel type of liquid crystal polymer (LCP) surface micro-electrode manufactured in three customized designs with up to 16 channels for recording and stimulation of brain activity. All designs include spare central spaces for simultaneous 2P-imaging. Nanoporous platinum-plated contact sites ensure a low impedance and high current transfer. The epidural implantation of the LCP micro-electrodes could be combined with standard cranial window surgery. The epidurally positioned electrodes did not only display long-term biocompatibility, but we also observed an additional stabilization of the underlying CNS tissue. We demonstrate the electrode’s versatility in combination with in vivo 2P-imaging by monitoring anesthesia-awake cycles of transgenic mice with GCaMP3 expression in neurons or astrocytes. Cortical stimulation and simultaneous 2P Ca2+ imaging in neurons or astrocytes highlighted the astrocytes’ integrative character in neuronal activity processing. Furthermore, we confirmed that spontaneous astroglial Ca2+ signals are dampened under anesthesia, while evoked signals in neurons and astrocytes showed stronger dependency on stimulation intensity rather than on various levels of anesthesia. Finally, we show that the electrodes provide recordings of the electrocorticogram (ECoG) with a high signal-to noise ratio and spatial signal differences which help to decipher brain activity states during experimental procedures. Summarizing, the novel LCP surface micro-electrode is a versatile, convenient, and reliable tool to investigate brain function in vivo.
While the contribution of renewable energy technologies to the energy system is increasing, so is its level of complexity. In addition to new types of consumer systems, the future system will be characterized by volatile generation plants that will require storage technologies. Furthermore, a solid interconnected system that enables the transit of electrical energy can reduce the need for generation and storage systems. Therefore, appropriate methods are needed to analyze energy production and consumption interactions within different system constellations. Energy system models can help to understand and build these future energy systems. However, although various energy models already exist, none of them can cover all issues related to integrating renewable energy systems. The existing research gap is also reflected in the fact that current models cannot model the entire energy system for very high shares of renewable energies with high temporal resolution (15 min or 1-h steps) and high spatial resolution. Additionally, the low availability of open-source energy models leads to a lack of transparency about exactly how they work. To close this gap, the sector-coupled energy model (UCB-SEnMod) was developed. Its unique features are the modular structure, high flexibility, and applicability, enabling it to model any system constellation and can be easily extended with new functions due to its software design. Due to the software architecture, it is possible to map individual buildings or companies and regions, or even countries. In addition, we plan to make the energy model UCB-SEnMod available as an open-source framework to enable users to understand the functionality and configuration options more easily. This paper presents the methodology of the UCB-SEnMod model. The main components of the model are described in detail, i.e., the energy generation systems, the consumption components in the electricity, heat, and transport sectors, and the possibilities of load balancing.
Many borate crystals feature nonlinear optical properties that allow for efficient frequency conversion of common lasers down into the ultraviolet spectrum. Twinning may degrade crystal quality and affect nonlinear optical properties, in particular if crystals are composed of twin domains with opposing polarities. Here, we use measurements of optical activity to demonstrate the existence of inversion twins within single crystals of YAl3(BO3)4 (YAB) and K2Al2B2O7 (KABO). We determine the optical rotatory dispersion of YAB and KABO throughout the visible spectrum using a spectrophotometer with rotatable polarizers. Space-resolved measurements of the optical rotation can be related to the twin structure and give estimates on the extent of twinning. The reported dispersion relations for the rotatory power of YAB and KABO may be used to assess crystal quality and to select twin-free specimens.
Railroads, roads, rivers, and airways are the most common modes of transportation for people and commodities. The cost of different ways of transportation varies according to distance, luxury, size, fragility, and other factors. When the following factors are accounted for, the vehicle might become prohibitively expensive for many individuals. A new means of conveyance has been developed. Elon Musk initially proposed it as the fifth mode of transportation in 2012. For commuters and goods, Hyperloop offers a quick and cost-effective way of transportation. The Hyperloop is essentially a vacuum tube train that transports people or products at incredible speeds while efficiently. Compared to traditional forms of transportation, the Hyperloop is ideal since it is highly energy-efficient, quiet, and self-contained. Increased cargo delivery speeds will be the most evident benefit of this idea to the industry. Hyperloop also has the potential to make a significant contribution to green supply chains. It is a carbon-free form of transportation that has changed inland freight transportation and maritime and air freight transit. It can move freight below, above ground, and under-water. The aim of this paper is to explain this new innovative technology as a development for logistic concepts.
This study will describe how the robotics industry evolved increasingly and a new phase of advanced robotics has emerged, and the relation between humans and robots in the same workplace. Problems of designing safer robots in human-machine interaction systems are urgent research topics in the field of industrial robotics. Many of the problems in industrial robotics are related not just to technological issues, but also to human-robot collaboration also will be discussed as an effective method to tackle this issue is the invention of Collaborative robots.
The objective of this study is to allow a better understanding of the role of industry 4.0 technologies, especially filament extrusion technology in the reduction of costs, environmental impact, energy consumption, and the possibility to expand the range of printable materials. The study focuses on the desktop Filament Extruders available in the market now, where these machines are assessed and future possible modifications for these apparatuses are presented. The research leading to the publication of this study consists of a review of the existing literature, in addition, information from different extruders manufacturers’ websites has been used. The study has demonstrated that the extrusion of material at home is still not an exact science, and the process ends up costing the user large sums of money over time. However, there are still limitations to the use of this technology such as the lack of standardized extrusion settings, the necessity of pre-drying the pellets, and the complexity of the extruder cleaning process after each use.
In this paper, the mechanical damage behavior is investigated based on the characteristic roughness on the surface and the orientation of superficial structures. The main goal is to explore the surface roughness on mechanically loaded copper conductors as a lifetime indicator. For this purpose, copper conductors are mechanically stressed in accordance with EN 50,396 and then examined metallographically and microscopically. The microstructure examination shows that the roughness is caused by material extrusion and cracks due to work hardening in the surface area. Using confocal microscopy, it is shown for the first time that significant formation of surface roughness takes place over the service life of copper conductors. The roughness increases monotonically, but not linearly with number of cycles, due to internal microstructural processes and can be divided into three sections. First inspections of the conductor surface over lifetime show a correlation between the intensity of structures orientated 45° to the loading direction and the roughness. This phenomenon, already known from microscopic slip lines, is thus also evident in macroscopic roughness formation and is well founded by the research theory on material extrusion along dislocation lines. In summary, a lifetime determination is possible based on its developing roughness which enables the utilization as a sensor element.
The introduction of functionalized magnetizable particles and high-gradient magnetic separation represents a time and money saving alternative to conventional purification and separation unit operations in the biotechnical sector. This technique has some advantages especially for the recycling of immobilized enzymes. A new magnetic filter with sight glasses was constructed and produced to study the performance of high-gradient magnetic separation at varied parameters. By optical analysis the buildup of a clogging was identified as the major parameter which affected the separation performance. For the cleaning procedure, a two-phase flow of water with highly dispersed air bubbles was tested which led to a nearly complete cleaning of the filter chamber.
The introduction of functionalized magnetizable particles for the purification of enzymes or for the multi-use of pre-immobilized biocatalysts offers a great potential for time and cost savings in biotechnological process design. The selective separation of the magnetizable particles is performed for example by a high-gradient magnetic separator. In this study FEM and CFD simulations of the magnetic field and the fluid flow field within a filter chamber of a magnetic separator were carried out, to find an optimal separator design. The motion of virtual magnetizable particles was calculated with a one-way coupled Lagrangian approach in order to test many geometric and parametric variations in reduced time. It was found that a flow homogenisator smoothed the fluid flow, so that the linear velocity became nearly equal over the cross section in the direction of flow. Furthermore the retention of magnetizable particles increases with a high total edge length within the filter matrix.
The number of additive manufacturing methods and materials is growing rapidly, leaving gaps in the knowledge of specific material properties. A relatively recent addition is the metal-filled filament to be printed similarly to the fused filament fabrication (FFF) technology used for plastic materials, but with additional debinding and sintering steps. While tensile, bending, and shear properties of metals manufactured this way have been studied thoroughly, their fatigue properties remain unexplored. Thus, the paper aims to determine the tensile, fatigue, and impact strengths of Markforged 17-4 PH and BASF Ultrafuse 316L stainless steel to answer whether the metal FFF can be used for structural parts safely with the current state of technology. They are compared to two 316L variants manufactured via selective laser melting (SLM) and literature results. For extrusion-based additive manufacturing methods, a significant decrease in tensile and fatigue strength is observed compared to specimens manufactured via SLM. Defects created during the extrusion and by the pathing scheme, causing a rough surface and internal voids to act as local stress risers, handle the strength decrease. The findings cast doubt on whether the metal FFF technique can be safely used for structural components; therefore, further developments are needed to reduce internal material defects.
For the assessment of human reaction time, a test environment was developed. This system consists of an embedded device with organic light-emitting diode (OLED) displays with push buttons for the combined presentation of visual stimulation and registration of the haptic human reaction. The test leader can define the test sequence with the aid of a graphical user interface (GUI) on a personal computer (PC). The validation of the system was proved by measuring the latency times of the whole system, which are conditioned by the specific hard- and software constellation. Through the investigation of the display’s light radiation by a photodiode and the recorded current consumption, latency times and their variance were specified. In the fastest mode the system can reach an error limit of 60 μs.
Organic semiconductor distributed feedback laser fabricated by direct laser interference ablation
(2007)
We use a pulsed, frequency tripled picosecond Nd:YAG laser for holographic ablation to pattern a surface relief grating into an organic semiconductor guest-host system. The resulting second order distributed feedback lasers exhibit laser action with laser thresholds being comparable to those obtained with resonators structured by standard lithographic techniques. The details of the interference ablation of tris-(8-hydroxyquinoline) aluminum (Alq(3)) doped with the laser dye 4- dicyanomethylene-2-methyl-6-(p-dimethylaminostyryl)-4H-pyran (DCM) are presented and discussed. Lasing action is demonstrated at a wavelength of 646.6 nm, exploiting second order Bragg reflection in a relief grating with a period of 399 nm.
Electrical stimulation is used for example to treat neuronal disorders and depression with deep brain stimulation or transcranial electrical stimulation. Depending on the application, different electrodes are used and thus different electrical characteristics exist, which have to be handled by the stimulator. Without a measuring device the user would have to rely on the stimulator being able to deliver the needed stimulation signal. Therefore, the objective of this paper is to present a method to increase the level of confidence with characterization and modelling of the electrical behavior by using the example of one channel of our stimulation device for experimental use. In several simulation studies with an electrode model with values in a typical range for cortical applications the influence of the load onto the stimulator and the possibility to pre-estimate measuring signals in complex networks are shown.
Passenger cars in Europe have become both heavier and more powerful over the past decades. This trend has increased vehicle utility but it might have also offset technical improvements in powertrain efficiency. Here, we analyze efficiency trade-offs and CO2 emissions for three popular compact cars in Germany. We find that mass, power, and front area of model variants has increased by 66%, 147%, and 22%, respectively between 1980 and 2018. In the same period, fuel consumption decreased 14% for gasoline models but it increased 9% for diesel models. However, if vehicle mass, power, and front area had remained at 1980 levels, technical efficiency improvements would have decreased the fuel consumption of gasoline and diesel models by 23% and 24%, respectively. The related efficiency trade-offs amount to 24 g CO2/km or 13% of the current fuel consumption for gasoline models and 40 g CO2/km or 25% of the current fuel consumption for diesel models. These findings suggest that about half of the technical efficiency improvements in gasoline models and all of the technical efficiency improvements in diesel models are offset through other vehicle attributes. By accounting for the observed efficiency trade-offs, climate policy could become more effective.
As productive biofilms are increasingly gaining interest in research, the quantitative monitoring of biofilm formation on- or offline for the process remains a challenge. Optical coherence tomography (OCT) is a fast and often used method for scanning biofilms, but it has difficulty scanning through more dense optical materials. X-ray microtomography (μCT) can measure biofilms in most geometries but is very time-consuming. By combining both methods for the first time, the weaknesses of both methods could be compensated. The phototrophic cyanobacterium Tolypothrix distorta was cultured in a moving bed photobioreactor inside a biocarrier with a semi-enclosed geometry. An automated workflow was developed to process µCT scans of the biocarriers. This allowed quantification of biomass volume and biofilm-coverage on the biocarrier, both globally and spatially resolved. At the beginning of the cultivation, a growth limitation was detected in the outer region of the carrier, presumably due to shear stress. In the later phase, light limitations could be found inside the biocarrier. µCT data and biofilm thicknesses measured by OCT displayed good correlation. The latter could therefore be used to rapidly measure the biofilm formation in a process. The methods presented here can help gain a deeper understanding of biofilms inside a process and detect any limitations.
This paper presents a feasibility study for the production of recycled glycol modified polyethylene terephthalate (PETG) material for additive manufacturing. Past studies showed a variety of results for the recycling of 3D-printing material, therefore the precise effect on the material properties is not completely clear. For this work, PETG waste of the same grade was recycled once and further processed into 3D printing filament. The study compares three blend ratios between purchased plastic pellets and recycled pellets to determine the degradation effect of one recycling cycle and possible blend ratios to counter these effects. Furthermore, the results include a commercially available filament. The comparison uses the filament diameter, the dimensional accuracy of the printed test specimen and mechanical properties as quality criteria. The study shows that the recycled material has a minor decrease concerning the tensile strength and Young’s modulus.
Since operational managers often monitor large numbers of wind turbines (WTs), they depend on a toolset to provide them with highly condensed information to identify and prioritize low performing WTs or schedule preventive maintenance measures. Power curves are a frequently used tool to assess the performance of WTs. The power curve health value (HV) used in this work is supposed to detect power curve anomalies since small deviations in the power curve are not easy to identify. It evaluates deviations in the linear region of power curves by performing a principal component analysis. To calculate the HV, the standard deviation in direction of the second principal component of a reference data set is compared to the standard deviation of a combined data set consisting of the reference data and data of the evaluated period. This article examines the applicability of this HV for different purposes as well as its sensitivities and provides a modified HV approach to make it more robust and suitable for heterogeneous data sets. The modified HV was tested based on ENGIE's open data wind farm and data of on- and offshore WTs from the WInD-Pool. It proved to detect anomalies in the linear region of the power curve in a reliable and sensitive manner and was also eligible to detect long term power curve degradation. Also, about 7 % of all corrective maintenance measures were preceded by high HVs with a median alarm horizon of three days. Overall, the HV proved to be a promising tool for various applications.
Electric drive systems are increasingly used in automobiles. However, the combination of comfort, dynamics and safety requirements places high demands on the torque accuracy. The complex interplay of battery, inverter and electrical machine causes a lot of system uncertainties based on parameter fluctuations and measurement errors that influence the system performance. In this paper these influences on the closed loop torque control are analyzed and quantified using a variance based sensitivity analysis. The method enables to connect the variance of the torque accuracy with the parameter uncertainties causing this variance. Moreover, it quantifies the influences of the parameters independent of the complexity of the analyzed system. In addition, two methods to ensure convergence of the estimated variance based sensitivity measures are proposed. The results of the analysis are presented for 19 static working points of an battery electric drive system.
Geometrieerzeugung von Evolventenzahntrieben: Profilverschobene schrägverzahnte Stirnzahnräder
(2022)
In dieser Arbeit wird die Zahnradgeometrie von Stirnrädern berechnet und formatiert, um sie in ein CAD-Programm zu übertragen. Dabei werden die Konturen der Evolvente und der Trochoide nach den gleichen Regel wie bei der Herstellung durch Wälzfräsen erzeugt. Der Anwender hat die Möglichkeit die Haupteigenschaften wie Modul, Zahnkopfspiel und Eckenverrundung einzugeben. Zusätzlich können auch schrägverzahnte, profilverschobene Stirnräder mit Hochverzahnung und Kopfkürzung erzeugt werden.
Per Datenausgabe werden die Koordinaten gespeichert und durch ein Makro in das CAD-Programm übertragen. Aus den beiden Konturzügen wird der 3D-Körper durch Austragen entlang der Helix erzeugt.
Zur Weiterverarbeitung wird die Zahnradgeometrie nach manueller Tesselierung in ein universales Dateiformat exportiert.