FB Umweltplanung/-technik (UCB)
Filtern
Erscheinungsjahr
Dokumenttyp
- Wissenschaftlicher Artikel (Fachzeitschriften) (44) (entfernen)
Volltext vorhanden
- ja (44)
Gehört zur Bibliographie
- nein (44)
Schlagworte
- Elektrofahrzeug (5)
- Biodiversität (4)
- CO2-Bilanz (4)
- Elektromobilität (4)
- Fermentation (4)
- Maschinelles Lernen (4)
- Biomonitoring (3)
- Insekten (3)
- Klimaänderung (3)
- Rapid Prototyping <Fertigung> (3)
Institut
Carbon footprinting of universities worldwide: Part I — objective comparison by standardized metrics
(2021)
Background: Universities, as innovation drivers in science and technology worldwide, should be leading the Great Transformation towards a carbon–neutral society and many have indeed picked up the challenge. However, only a small number of universities worldwide are collecting and publishing their carbon footprints, and some of them have defined zero emission targets. Unfortunately, there is limited consistency between the reported carbon footprints (CFs) because of different analysis methods, different impact measures, and different target definitions by the respective universities.
Results: Comprehensive CF data of 20 universities from around the globe were collected and analysed. Essential factors contributing to the university CF were identified. For the first time, CF data from universities were not only compared. The CF data were also evaluated, partly corrected, and augmented by missing contributions, to improve the consistency and comparability. The CF performance of each university in the respective year is thus homogenized, and measured by means of two metrics: CO2e emissions per capita and per m2 of constructed area. Both metrics vary by one order of magnitude across the different universities in this study. However, we identified ten universities reaching a per capita carbon footprint of lower than or close to 1.0 Mt (metric tons) CO2e/person and year (normalized by the number of people associated with the university), independent from the university’s size. In addition to the aforementioned two metrics, we suggested a new metric expressing the economic efficiency in terms of the CF per $ expenditures and year. We next aggregated the results for all three impact measures, arriving at an overall carbon performance for the respective universities, which we found to be independent of geographical latitude. Instead the per capita measure correlates with the national per capita CFs, and it reaches on average 23% of the national impacts per capita. The three top performing universities are located in Switzerland, Chile, and Germany.
Conclusion: The usual reporting of CO2 emissions is categorized into Scopes 1–3 following the GHG Protocol Corporate Accounting Standard which makes comparison across universities challenging. In this study, we attempted to standardize the CF metrics, allowing us to objectively compare the CF at several universities. From this study, we observed that, almost 30 years after the Earth Summit in Rio de Janeiro (1992), the results are still limited. Only one zero emission university was identified, and hence, the transformation should speed up globally.
This study compares the environmental impacts of petrol, diesel, natural gas, and electric vehicles using a process-based attributional life cycle assessment (LCA) and the ReCiPe characterization method that captures 18 impact categories and the single score endpoints. Unlike common practice, we derive the cradle-to-grave inventories from an originally combustion engine VW Caddy that was disassembled and electrified in our laboratory, and its energy consumption was measured on the road. Ecoivent 2.2 and 3.0 emission inventories were contrasted exhibiting basically insignificant impact deviations. Ecoinvent 3.0 emission inventory for the diesel car was additionally updated with recent real-world close emission values and revealed strong increases over four midpoint impact categories, when matched with the standard Ecoinvent 3.0 emission inventory. Producing batteries with photovoltaic electricity instead of Chinese coal-based electricity decreases climate impacts of battery production by 69%. Break-even mileages for the electric VW Caddy to pass the combustion engine models under various conditions in terms of climate change impact ranged from 17,000 to 310,000 km. Break-even mileages, when contrasting the VW Caddy and a mini car (SMART), which was as well electrified, did not show systematic differences. Also, CO2-eq emissions in terms of passenger kilometers travelled (54–158 g CO2-eq/PKT) are fairly similar based on 1 person travelling in the mini car and 1.57 persons in the mid-sized car (VW Caddy). Additionally, under optimized conditions (battery production and use phase utilizing renewable electricity), the two electric cars can compete well in terms of CO2-eq emissions per passenger kilometer with other traffic modes (diesel bus, coach, trains) over lifetime. Only electric buses were found to have lower life cycle carbon emissions (27–52 g CO2-eq/PKT) than the two electric passenger cars.
A new comprehensive evaluation system presented here allows to compare and to quantify education for a sustainable development (ESD) in degree programs. The evaluation is based on a criteria system working with three hierarchic levels. The highest level considers a list of 35 indicator terms. Primarily, the two most popular undergraduate (bachelor’s) degree programs in Germany (mechanical engineering, ME, and business administration, BA) have been reviewed for ESD contents based on the new evaluation scheme. Additionally we reviewed and quantified ESD subjects and their temporal changes in the entire bandwidth of degree programs of a university (Umwelt-Campus Birkenfeld, University of Applied Sciences Trier), back to 1999. Moreover, a spot check on international ME and BA bachelor’s degree programs was performed. Through our reviews, we found a high number of elective classes dedicated to ESD particularly in BA bachelor programs. However, the percentage of compulsory classes related to ESD is relatively low with 5-6 % in both ME and BA programs, respectively. The spot check on degree programs outside Germany revealed similar results. Analysing the time trend at Umwelt-Campus Birkenfeld, a considerable share of ESD that was part of the original diploma degrees was moved to what are now master’s degrees.
A comprehensive overview is provided evaluating direct real-world CO2 emissions of both diesel and petrol cars newly registered in Europe between 1995 and 2015. Before 2011, European diesel cars emitted less CO2 per kilometre than petrol cars, but since then there is no appreciable difference in per-km CO2 emissions between diesel and petrol cars. Real-world CO2 emissions of diesel cars have not declined appreciably since 2001, while the CO2 emissions of petrol cars have been stagnant since 2012. When adding black carbon related CO2-equivalents, such as from diesel cars without particulate filters, diesel cars were discovered to have had much higher climate relevant emissions until the year 2001 when compared to petrol cars. From 2001 to 2015 CO2-equivalent emissions from new diesel cars and petrol cars were hardly distinguishable. Lifetime use phase CO2-equivalent emissions of all European passenger vehicles were modelled for 1995–2015 based on three scenarios: the historic case, another scenario freezing percentages of diesel cars at the low levels from the early 1990s (thus avoiding the observed “boom” in new diesel registrations), and an advanced mitigation scenario based on high proportions of petrol hybrid cars and cars burning gaseous fuels. The difference in CO2-equivalent emissions between the historical case and the scenario avoiding the diesel car boom is only 0.4%. The advanced mitigation scenario would have been able to achieve a 3.4% reduction in total CO2-equivalent emissions over the same time frame. The European diesel car boom appears to have been ineffective at reducing climate-warming emissions from the European transport sector.
Background: Electric vehicles have been identified as being a key technology in reducing future emissions and energy consumption in the mobility sector. The focus of this article is to review and assess the energy efficiency and the environmental impact of battery electric cars (BEV), which is the only technical alternative on the market available today to vehicles with internal combustion engine (ICEV). Electricity onboard a car can be provided either by a battery or a fuel cell (FCV). The technical structure of BEV is described, clarifying that it is relatively simple compared to ICEV. Following that, ICEV can be ‘e-converted’ by experienced personnel. Such an e-conversion project generated reality-close data reported here.
Results: Practicability of today's BEV is discussed, revealing that particularly small-size BEVs are useful. This article reports on an e-conversion of a used Smart. Measurements on this car, prior and after conversion, confirmed a fourfold energy efficiency advantage of BEV over ICEV, as supposed in literature. Preliminary energy efficiency data of FCV are reviewed being only slightly lower compared to BEV. However, well-to-wheel efficiency suffers from 47% to 63% energy loss during hydrogen production. With respect to energy efficiency, BEVs are found to represent the only alternative to ICEV. This, however, is only true if the electricity is provided by very efficient power plants or better by renewable energy production. Literature data on energy consumption and greenhouse gas (GHG) emission by ICEV compared to BEV suffer from a 25% underestimation of ICEV-standardized driving cycle numbers in relation to street conditions so far. Literature data available for BEV, on the other hand, were mostly modeled and based on relatively heavy BEV as well as driving conditions, which do not represent the most useful field of BEV operation. Literature data have been compared with measurements based on the converted Smart, revealing a distinct GHG emissions advantage due to the German electricity net conditions, which can be considerably extended by charging electricity from renewable sources. Life cycle carbon footprint of BEV is reviewed based on literature data with emphasis on lithium-ion batteries. Battery life cycle assessment (LCA) data available in literature, so far, vary significantly by a factor of up to 5.6 depending on LCA methodology approach, but also with respect to the battery chemistry. Carbon footprint over 100,000 km calculated for the converted 10-year-old Smart exhibits a possible reduction of over 80% in comparison to the Smart with internal combustion engine.
Conclusion: Findings of the article confirm that the electric car can serve as a suitable instrument towards a much more sustainable future in mobility. This is particularly true for small-size BEV, which is underrepresented in LCA literature data so far. While CO2-LCA of BEV seems to be relatively well known apart from the battery, life cycle impact of BEV in categories other than the global warming potential reveals a complex and still incomplete picture. Since technology of the electric car is of limited complexity with the exception of the battery, used cars can also be converted from combustion to electric. This way, it seems possible to reduce CO2-equivalent emissions by 80% (factor 5 efficiency improvement).
Concerns over climate change, air pollution, and oil supply have stimulated the market for battery electric vehicles (BEVs). The environmental impacts of BEVs are typically evaluated through a standardized life-cycle assessment (LCA) methodology. Here, the LCA literature was surveyed with the objective to sketch the major trends and challenges in the impact assessment of BEVs. It was found that BEVs tend to be more energy efficient and less polluting than conventional cars. BEVs decrease exposure to air pollution as their impacts largely result from vehicle production and electricity generation outside of urban areas. The carbon footprint of BEVs, being highly sensitive to the carbon intensity of the electricity mix, may decrease in the nearby future through a shift to renewable energies and technology improvements in general. A minority of LCAs covers impact categories other than carbon footprint, revealing a mixed picture. Up to date little attention is paid so far in LCA to the efficiency advantage of BEVs in urban traffic, the gap between on-road and certified energy consumption, the local exposure to air pollutants and noise and the aging of emissions control technologies in conventional cars. Improvements of BEV components, directed charging, second-life reuse of vehicle batteries, as well as vehicle-to-home and vehicle-to-grid applications will significantly reduce the environmental impacts of BEVs in the future.
One key for successful and fluent human-robot-collaboration in disassembly processes is equipping the robot system with higher autonomy and intelligence. In this paper, we present an informed software agent that controls the robot behavior to form an intelligent robot assistant for disassembly purposes. While the disassembly process first depends on the product structure, we inform the agent using a generic approach through product models. The product model is then transformed to a directed graph and used to build, share and define a coarse disassembly plan. To refine the workflow, we formulate "the problem of loosening a connection and the distribution of the work" as a search problem. The created detailed plan consists of a sequence of actions that are used to call, parametrize and execute robot programs for the fulfillment of the assistance. The aim of this research is to equip robot systems with knowledge and skills to allow them to be autonomous in the performance of their assistance to finally improve the ergonomics of disassembly workstations.
Fuzzy system based on two-step cascade genetic optimization strategy for tobacco tar prediction
(2019)
There are many challenges in accurately measuring cigarette tar constituents. These include the need for standardized smoke generation methods related to unstable mixtures. In this research were developed algorithms using fusion of artificial intelligence methods to predict tar concentration. Outputs of development are three fuzzy structures optimized with genetic algorithms resulting in genetic algorithm (GA)-FUZZY, GA-adaptive neuro fuzzy inference system (ANFIS), GA-GA-FUZZY algorithms. Proposed algorithms are used for the tar prediction in the cigarette production process. The results of prediction are compared with gas chromatograph (high-performance liquid chromatography (HPLC)) readings.
The number of additive manufacturing methods and materials is growing rapidly, leaving gaps in the knowledge of specific material properties. A relatively recent addition is the metal-filled filament to be printed similarly to the fused filament fabrication (FFF) technology used for plastic materials, but with additional debinding and sintering steps. While tensile, bending, and shear properties of metals manufactured this way have been studied thoroughly, their fatigue properties remain unexplored. Thus, the paper aims to determine the tensile, fatigue, and impact strengths of Markforged 17-4 PH and BASF Ultrafuse 316L stainless steel to answer whether the metal FFF can be used for structural parts safely with the current state of technology. They are compared to two 316L variants manufactured via selective laser melting (SLM) and literature results. For extrusion-based additive manufacturing methods, a significant decrease in tensile and fatigue strength is observed compared to specimens manufactured via SLM. Defects created during the extrusion and by the pathing scheme, causing a rough surface and internal voids to act as local stress risers, handle the strength decrease. The findings cast doubt on whether the metal FFF technique can be safely used for structural components; therefore, further developments are needed to reduce internal material defects.
Research in global change ecology relies heavily on global climatic grids derived from estimates of air temperature in open areas at around 2 m above the ground. These climatic grids do not reflect conditions below vegetation canopies and near the ground surface, where critical ecosystem functions occur and most terrestrial species reside. Here, we provide global maps of soil temperature and bioclimatic variables at a 1-km2 resolution for 0–5 and 5–15 cm soil depth. These maps were created by calculating the difference (i.e. offset) between in situ soil temperature measurements, based on time series from over 1200 1-km2 pixels (summarized from 8519 unique temperature sensors) across all the world's major terrestrial biomes, and coarse-grained air temperature estimates from ERA5-Land (an atmospheric reanalysis by the European Centre for Medium-Range Weather Forecasts). We show that mean annual soil temperature differs markedly from the corresponding gridded air temperature, by up to 10°C (mean = 3.0 ± 2.1°C), with substantial variation across biomes and seasons. Over the year, soils in cold and/or dry biomes are substantially warmer (+3.6 ± 2.3°C) than gridded air temperature, whereas soils in warm and humid environments are on average slightly cooler (−0.7 ± 2.3°C). The observed substantial and biome-specific offsets emphasize that the projected impacts of climate and climate change on near-surface biodiversity and ecosystem functioning are inaccurately assessed when air rather than soil temperature is used, especially in cold environments. The global soil-related bioclimatic variables provided here are an important step forward for any application in ecology and related disciplines. Nevertheless, we highlight the need to fill remaining geographic gaps by collecting more in situ measurements of microclimate conditions to further enhance the spatiotemporal resolution of global soil temperature products for ecological applications.