Filtern
Erscheinungsjahr
Dokumenttyp
Volltext vorhanden
- ja (44)
Gehört zur Bibliographie
- nein (44)
Schlagworte
- Elektrofahrzeug (5)
- Biodiversität (4)
- CO2-Bilanz (4)
- Elektromobilität (4)
- Fermentation (4)
- Maschinelles Lernen (4)
- Biomonitoring (3)
- Insekten (3)
- Klimaänderung (3)
- Rapid Prototyping <Fertigung> (3)
Institut
- FB Umweltplanung/-technik (UCB) (44) (entfernen)
A comprehensive overview is provided evaluating direct real-world CO2 emissions of both diesel and petrol cars newly registered in Europe between 1995 and 2015. Before 2011, European diesel cars emitted less CO2 per kilometre than petrol cars, but since then there is no appreciable difference in per-km CO2 emissions between diesel and petrol cars. Real-world CO2 emissions of diesel cars have not declined appreciably since 2001, while the CO2 emissions of petrol cars have been stagnant since 2012. When adding black carbon related CO2-equivalents, such as from diesel cars without particulate filters, diesel cars were discovered to have had much higher climate relevant emissions until the year 2001 when compared to petrol cars. From 2001 to 2015 CO2-equivalent emissions from new diesel cars and petrol cars were hardly distinguishable. Lifetime use phase CO2-equivalent emissions of all European passenger vehicles were modelled for 1995–2015 based on three scenarios: the historic case, another scenario freezing percentages of diesel cars at the low levels from the early 1990s (thus avoiding the observed “boom” in new diesel registrations), and an advanced mitigation scenario based on high proportions of petrol hybrid cars and cars burning gaseous fuels. The difference in CO2-equivalent emissions between the historical case and the scenario avoiding the diesel car boom is only 0.4%. The advanced mitigation scenario would have been able to achieve a 3.4% reduction in total CO2-equivalent emissions over the same time frame. The European diesel car boom appears to have been ineffective at reducing climate-warming emissions from the European transport sector.
A new comprehensive evaluation system presented here allows to compare and to quantify education for a sustainable development (ESD) in degree programs. The evaluation is based on a criteria system working with three hierarchic levels. The highest level considers a list of 35 indicator terms. Primarily, the two most popular undergraduate (bachelor’s) degree programs in Germany (mechanical engineering, ME, and business administration, BA) have been reviewed for ESD contents based on the new evaluation scheme. Additionally we reviewed and quantified ESD subjects and their temporal changes in the entire bandwidth of degree programs of a university (Umwelt-Campus Birkenfeld, University of Applied Sciences Trier), back to 1999. Moreover, a spot check on international ME and BA bachelor’s degree programs was performed. Through our reviews, we found a high number of elective classes dedicated to ESD particularly in BA bachelor programs. However, the percentage of compulsory classes related to ESD is relatively low with 5-6 % in both ME and BA programs, respectively. The spot check on degree programs outside Germany revealed similar results. Analysing the time trend at Umwelt-Campus Birkenfeld, a considerable share of ESD that was part of the original diploma degrees was moved to what are now master’s degrees.
This study compares the environmental impacts of petrol, diesel, natural gas, and electric vehicles using a process-based attributional life cycle assessment (LCA) and the ReCiPe characterization method that captures 18 impact categories and the single score endpoints. Unlike common practice, we derive the cradle-to-grave inventories from an originally combustion engine VW Caddy that was disassembled and electrified in our laboratory, and its energy consumption was measured on the road. Ecoivent 2.2 and 3.0 emission inventories were contrasted exhibiting basically insignificant impact deviations. Ecoinvent 3.0 emission inventory for the diesel car was additionally updated with recent real-world close emission values and revealed strong increases over four midpoint impact categories, when matched with the standard Ecoinvent 3.0 emission inventory. Producing batteries with photovoltaic electricity instead of Chinese coal-based electricity decreases climate impacts of battery production by 69%. Break-even mileages for the electric VW Caddy to pass the combustion engine models under various conditions in terms of climate change impact ranged from 17,000 to 310,000 km. Break-even mileages, when contrasting the VW Caddy and a mini car (SMART), which was as well electrified, did not show systematic differences. Also, CO2-eq emissions in terms of passenger kilometers travelled (54–158 g CO2-eq/PKT) are fairly similar based on 1 person travelling in the mini car and 1.57 persons in the mid-sized car (VW Caddy). Additionally, under optimized conditions (battery production and use phase utilizing renewable electricity), the two electric cars can compete well in terms of CO2-eq emissions per passenger kilometer with other traffic modes (diesel bus, coach, trains) over lifetime. Only electric buses were found to have lower life cycle carbon emissions (27–52 g CO2-eq/PKT) than the two electric passenger cars.
Universities, as innovation drivers in science and technology worldwide, should attempt to become carbon-neutral institutions and should lead this transformation. Many universities have picked up the challenge and quantified their carbon footprints; however, up-to-date quantification is limited to use-phase emissions. So far, data on embodied impacts of university campus infrastructure are missing, which prevents us from evaluating their life cycle costs. In this paper, we quantify the embodied impacts of two university campuses of very different sizes and climate zones: the Umwelt-Campus Birkenfeld (UCB), Germany, and the Nanyang Technological University (NTU), Singapore. We also quantify the effects of switching to full renewable energy supply on the carbon footprint of a university campus based on the example of UCB. The embodied impacts amount to 13.7 (UCB) and 26.2 (NTU) kg CO2e/m2•y, respectively, equivalent to 59.2% (UCB), and 29.8% (NTU), respectively, of the building lifecycle impacts. As a consequence, embodied impacts can be dominating; thus, they should be quantified and reported. When adding additional use-phase impacts caused by the universities on top of the building lifecycle impacts (e.g., mobility impacts), both institutions happen to exhibit very similar emissions with 124.5–126.3 kg CO2e/m2•y despite their different sizes, structures, and locations. Embodied impacts comprise 11.0–20.8% of the total impacts at the two universities. In conclusion, efficient reduction in university carbon footprints requires a holistic approach, considering all impacts caused on and by a campus including upstream effects.
Carbon footprinting of universities worldwide: Part I — objective comparison by standardized metrics
(2021)
Background: Universities, as innovation drivers in science and technology worldwide, should be leading the Great Transformation towards a carbon–neutral society and many have indeed picked up the challenge. However, only a small number of universities worldwide are collecting and publishing their carbon footprints, and some of them have defined zero emission targets. Unfortunately, there is limited consistency between the reported carbon footprints (CFs) because of different analysis methods, different impact measures, and different target definitions by the respective universities.
Results: Comprehensive CF data of 20 universities from around the globe were collected and analysed. Essential factors contributing to the university CF were identified. For the first time, CF data from universities were not only compared. The CF data were also evaluated, partly corrected, and augmented by missing contributions, to improve the consistency and comparability. The CF performance of each university in the respective year is thus homogenized, and measured by means of two metrics: CO2e emissions per capita and per m2 of constructed area. Both metrics vary by one order of magnitude across the different universities in this study. However, we identified ten universities reaching a per capita carbon footprint of lower than or close to 1.0 Mt (metric tons) CO2e/person and year (normalized by the number of people associated with the university), independent from the university’s size. In addition to the aforementioned two metrics, we suggested a new metric expressing the economic efficiency in terms of the CF per $ expenditures and year. We next aggregated the results for all three impact measures, arriving at an overall carbon performance for the respective universities, which we found to be independent of geographical latitude. Instead the per capita measure correlates with the national per capita CFs, and it reaches on average 23% of the national impacts per capita. The three top performing universities are located in Switzerland, Chile, and Germany.
Conclusion: The usual reporting of CO2 emissions is categorized into Scopes 1–3 following the GHG Protocol Corporate Accounting Standard which makes comparison across universities challenging. In this study, we attempted to standardize the CF metrics, allowing us to objectively compare the CF at several universities. From this study, we observed that, almost 30 years after the Earth Summit in Rio de Janeiro (1992), the results are still limited. Only one zero emission university was identified, and hence, the transformation should speed up globally.
Background: Tobacco smoking prevalence continues to be high, particularly among adolescents and young adults with lower educational levels, and is therefore a serious public health problem. Tobacco smoking and problem drinking often co-occur and relapses after successful smoking cessation are often associated with alcohol use. This study aims at testing the efficacy of an integrated smoking cessation and alcohol intervention by comparing it to a smoking cessation only intervention for young people, delivered via the Internet and mobile phone.
Methods/Design: A two-arm cluster-randomised controlled trial with one follow-up assessment after 6 months will be conducted. Participants in the integrated intervention group will: (1) receive individually tailored web-based feedback on their drinking behaviour based on age and gender norms, (2) receive individually tailored mobile phone text messages to promote drinking within low-risk limits over a 3-month period, (3) receive individually tailored mobile phone text messages to support smoking cessation for 3 months, and (4) be offered the option of registering for a more intensive program that provides strategies for smoking cessation centred around a self-defined quit date. Participants in the smoking cessation only intervention group will only receive components (3) and (4). Study participants will be 1350 students who smoke tobacco daily/occasionally, from vocational schools in Switzerland. Main outcome criteria are 7-day point prevalence smoking abstinence and cigarette consumption assessed at the 6-month follow up.
Discussion: This is the first study testing a fully automated intervention for smoking cessation that simultaneously addresses alcohol use and interrelations between tobacco and alcohol use. The integrated intervention can be easily implemented in various settings and could be used with large groups of young people in a cost-effective way.
Background: Problem drinking, particularly risky single-occasion drinking is widespread among adolescents and young adults in most Western countries. Mobile phone text messaging allows a proactive and cost-effective delivery of short messages at any time and place and allows the delivery of individualised information at times when young people typically drink alcohol. The main objective of the planned study is to test the efficacy of a combined web- and text messaging-based intervention to reduce problem drinking in young people with heterogeneous educational level.
Methods/Design: A two-arm cluster-randomised controlled trial with one follow-up assessment after 6 months will be conducted to test the efficacy of the intervention in comparison to assessment only. The fully-automated intervention program will provide an online feedback based on the social norms approach as well as individually tailored mobile phone text messages to stimulate (1) positive outcome expectations to drink within low-risk limits, (2) self-efficacy to resist alcohol and (3) planning processes to translate intentions to resist alcohol into action. Program participants will receive up to two weekly text messages over a time period of 3 months. Study participants will be 934 students from approximately 93 upper secondary and vocational schools in Switzerland. Main outcome criterion will be risky single-occasion drinking in the past 30 days preceding the follow-up assessment.
Discussion: This is the first study testing the efficacy of a combined web- and text messaging-based intervention to reduce problem drinking in young people. Given that this intervention approach proves to be effective, it could be easily implemented in various settings, and it could reach large numbers of young people in a cost-effective way.
Global change effects on biodiversity and human wellbeing call for improved long-term environmental data as a basis for science, policy and decision making, including increased interoperability, multifunctionality, and harmonization. Based on the example of two global initiatives, the International Long-Term Ecological Research (ILTER) network and the Group on Earth Observations Biodiversity Observation Network (GEO BON), we propose merging the frameworks behind these initiatives, namely ecosystem integrity and essential biodiversity variables, to serve as an improved guideline for future site-based long-term research and monitoring in terrestrial, freshwater and coastal ecosystems. We derive a list of specific recommendations of what and how to measure at a monitoring site and call for an integration of sites into co-located site networks across individual monitoring initiatives, and centered on ecosystems. This facilitates the generation of linked comprehensive ecosystem monitoring data, supports synergies in the use of costly infrastructures, fosters cross-initiative research and provides a template for collaboration beyond the ILTER and GEO BON communities.
Many borate crystals feature nonlinear optical properties that allow for efficient frequency conversion of common lasers down into the ultraviolet spectrum. Twinning may degrade crystal quality and affect nonlinear optical properties, in particular if crystals are composed of twin domains with opposing polarities. Here, we use measurements of optical activity to demonstrate the existence of inversion twins within single crystals of YAl3(BO3)4 (YAB) and K2Al2B2O7 (KABO). We determine the optical rotatory dispersion of YAB and KABO throughout the visible spectrum using a spectrophotometer with rotatable polarizers. Space-resolved measurements of the optical rotation can be related to the twin structure and give estimates on the extent of twinning. The reported dispersion relations for the rotatory power of YAB and KABO may be used to assess crystal quality and to select twin-free specimens.
This paper presents a feasibility study for the production of recycled glycol modified polyethylene terephthalate (PETG) material for additive manufacturing. Past studies showed a variety of results for the recycling of 3D-printing material, therefore the precise effect on the material properties is not completely clear. For this work, PETG waste of the same grade was recycled once and further processed into 3D printing filament. The study compares three blend ratios between purchased plastic pellets and recycled pellets to determine the degradation effect of one recycling cycle and possible blend ratios to counter these effects. Furthermore, the results include a commercially available filament. The comparison uses the filament diameter, the dimensional accuracy of the printed test specimen and mechanical properties as quality criteria. The study shows that the recycled material has a minor decrease concerning the tensile strength and Young’s modulus.
While the contribution of renewable energy technologies to the energy system is increasing, so is its level of complexity. In addition to new types of consumer systems, the future system will be characterized by volatile generation plants that will require storage technologies. Furthermore, a solid interconnected system that enables the transit of electrical energy can reduce the need for generation and storage systems. Therefore, appropriate methods are needed to analyze energy production and consumption interactions within different system constellations. Energy system models can help to understand and build these future energy systems. However, although various energy models already exist, none of them can cover all issues related to integrating renewable energy systems. The existing research gap is also reflected in the fact that current models cannot model the entire energy system for very high shares of renewable energies with high temporal resolution (15 min or 1-h steps) and high spatial resolution. Additionally, the low availability of open-source energy models leads to a lack of transparency about exactly how they work. To close this gap, the sector-coupled energy model (UCB-SEnMod) was developed. Its unique features are the modular structure, high flexibility, and applicability, enabling it to model any system constellation and can be easily extended with new functions due to its software design. Due to the software architecture, it is possible to map individual buildings or companies and regions, or even countries. In addition, we plan to make the energy model UCB-SEnMod available as an open-source framework to enable users to understand the functionality and configuration options more easily. This paper presents the methodology of the UCB-SEnMod model. The main components of the model are described in detail, i.e., the energy generation systems, the consumption components in the electricity, heat, and transport sectors, and the possibilities of load balancing.
Numerous research methods have been developed to detect anomalies in the areas of security and risk analysis. In healthcare, there are numerous use cases where anomaly detection is relevant. For example, early detection of sepsis is one such use case. Early treatment of sepsis is cost effective and reduces the number of hospital days of patients in the ICU. There is no single procedure that is sufficient for sepsis diagnosis, and combinations of approaches are needed. Detecting anomalies in patient time series data could help speed the development of some decisions. However, our algorithm must be viewed as complementary to other approaches based on laboratory values and physician judgments. The focus of this work is to develop a hybrid method for detecting anomalies that occur, for example, in multidimensional medical signals, sensor signals, or other time series in business and nature. The novelty of our approach lies in the extension and combination of existing approaches: Statistics, Self Organizing Maps and Linear Discriminant Analysis in a unique and unprecedented way with the goal of identifying different types of anomalies in real-time measurement data and defining the point where the anomaly occurs. The proposed algorithm not only has the full potential to detect anomalies, but also to find real points where an anomaly starts.
Background: In recent years, the volume of medical knowledge and health data has increased rapidly. For example, the increased availability of electronic health records (EHRs) provides accurate, up-to-date, and complete information about patients at the point of care and enables medical staff to have quick access to patient records for more coordinated and efficient care. With this increase in knowledge, the complexity of accurate, evidence-based medicine tends to grow all the time. Health care workers must deal with an increasing amount of data and documentation. Meanwhile, relevant patient data are frequently overshadowed by a layer of less relevant data, causing medical staff to often miss important values or abnormal trends and their importance to the progression of the patient’s case.
Objective: The goal of this work is to analyze the current laboratory results for patients in the intensive care unit (ICU) and classify which of these lab values could be abnormal the next time the test is done. Detecting near-future abnormalities can be useful to support clinicians in their decision-making process in the ICU by drawing their attention to the important values and focus on future lab testing, saving them both time and money. Additionally, it will give doctors more time to spend with patients, rather than skimming through a long list of lab values.
Methods: We used Structured Query Language to extract 25 lab values for mechanically ventilated patients in the ICU from the MIMIC-III and eICU data sets. Additionally, we applied time-windowed sampling and holding, and a support vector machine to fill in the missing values in the sparse time series, as well as the Tukey range to detect and delete anomalies. Then, we used the data to train 4 deep learning models for time series classification, as well as a gradient boosting–based algorithm and compared their performance on both data sets.
Results: The models tested in this work (deep neural networks and gradient boosting), combined with the preprocessing pipeline, achieved an accuracy of at least 80% on the multilabel classification task. Moreover, the model based on the multiple convolutional neural network outperformed the other algorithms on both data sets, with the accuracy exceeding 89%.
Conclusions: In this work, we show that using machine learning and deep neural networks to predict near-future abnormalities in lab values can achieve satisfactory results. Our system was trained, validated, and tested on 2 well-known data sets to ensure that our system bridged the reality gap as much as possible. Finally, the model can be used in combination with our preprocessing pipeline on real-life EHRs to improve patients’ diagnosis and treatment.
Ahmad et al. in their paper for the first time proposed to apply sharp function for classification of images. In continuation of their work, in this paper we investigate the use of sharp function as an edge detector through well known diffusion models. Further, we discuss the formulation of weak solution of nonlinear diffusion equation and prove uniqueness of weak solution of nonlinear problem. The anisotropic generalization of sharp operator based diffusion has also been implemented and tested on various types of images.