60 Technik
Filtern
Erscheinungsjahr
- 2022 (3)
Dokumenttyp
Sprache
- Englisch (3)
Volltext vorhanden
- ja (3)
Gehört zur Bibliographie
- nein (3)
Schlagworte
- additive manufacturing (3) (entfernen)
Institut
This paper presents a feasibility study for the production of recycled glycol modified polyethylene terephthalate (PETG) material for additive manufacturing. Past studies showed a variety of results for the recycling of 3D-printing material, therefore the precise effect on the material properties is not completely clear. For this work, PETG waste of the same grade was recycled once and further processed into 3D printing filament. The study compares three blend ratios between purchased plastic pellets and recycled pellets to determine the degradation effect of one recycling cycle and possible blend ratios to counter these effects. Furthermore, the results include a commercially available filament. The comparison uses the filament diameter, the dimensional accuracy of the printed test specimen and mechanical properties as quality criteria. The study shows that the recycled material has a minor decrease concerning the tensile strength and Young’s modulus.
The number of additive manufacturing methods and materials is growing rapidly, leaving gaps in the knowledge of specific material properties. A relatively recent addition is the metal-filled filament to be printed similarly to the fused filament fabrication (FFF) technology used for plastic materials, but with additional debinding and sintering steps. While tensile, bending, and shear properties of metals manufactured this way have been studied thoroughly, their fatigue properties remain unexplored. Thus, the paper aims to determine the tensile, fatigue, and impact strengths of Markforged 17-4 PH and BASF Ultrafuse 316L stainless steel to answer whether the metal FFF can be used for structural parts safely with the current state of technology. They are compared to two 316L variants manufactured via selective laser melting (SLM) and literature results. For extrusion-based additive manufacturing methods, a significant decrease in tensile and fatigue strength is observed compared to specimens manufactured via SLM. Defects created during the extrusion and by the pathing scheme, causing a rough surface and internal voids to act as local stress risers, handle the strength decrease. The findings cast doubt on whether the metal FFF technique can be safely used for structural components; therefore, further developments are needed to reduce internal material defects.
The objective of this study is to allow a better understanding of the role of industry 4.0 technologies, especially filament extrusion technology in the reduction of costs, environmental impact, energy consumption, and the possibility to expand the range of printable materials. The study focuses on the desktop Filament Extruders available in the market now, where these machines are assessed and future possible modifications for these apparatuses are presented. The research leading to the publication of this study consists of a review of the existing literature, in addition, information from different extruders manufacturers’ websites has been used. The study has demonstrated that the extrusion of material at home is still not an exact science, and the process ends up costing the user large sums of money over time. However, there are still limitations to the use of this technology such as the lack of standardized extrusion settings, the necessity of pre-drying the pellets, and the complexity of the extruder cleaning process after each use.